Here is a bunch of info in a image:
It has been brought to my attention that it wasn’t clear as to why Matt and I milled down the Jobbit 2.0 case and new cylinder. Its really pretty simple, because of the similar stroke length. The Honda Hobbit / Camino / PA50 have a stroke length 39.6mm and the Yamaha Aerox has a stroke [...]
Uses hide behind bush; its super effective!
For the Jobbit 2.0 Honda water cooled project it turned our that Puch 105mm M6 cylinder studs are slightly too short. And cylinder studs in general jump up to M7 much beyond 105mm. Luckily Grainger sells a 110mm M6x1 hardened stud. You can find them here. They are a bit expensive but the quality is way [...]
Back before the Malossi H2O Kit was available I started looking for a water cooled kit that would work with my PA50. All I needed was a scooter kit with a stroke lenght of 39.6mm, a wrist pin of 10mm, and a similar bolt pattern. Enter the Yamaha Areox, a liquid cooled scooter with a stroke length of [...]
Dave attempting to change a tire on a brisk Sunday afternoon.
A few games of Settlers on the first warm night of spring.